For some small-scale machinery processing plant, in the production process of processing machinery parts that hides a lot of tips have not yet been developed and used. Especially for non-standard precision mechanical parts processing tips, many large-scale machinery factories to improve the efficiency of the good method.
Tip 1：
In the use of vise jaw processing and disassembly of non-standard precision machine parts, in order to prevent precision machine parts are poorly clamped, can be processed in the vise jaw two M4 threaded holes, at the same time to make the thickness of 1.5mm steel plate and jaw alignment. Then use M4 countersunk head screws to have a good thickness of 0.8mm hard brass plate riveted to the vise jaws, can be formed without destroying the mechanical parts of the soft jaws.
Tip 2：
In the use of magnets to absorb small precision mechanical parts in front of the magnet to suck a piece of iron plate, and then let the small precision mechanical parts adsorbed on the iron plate. The purpose of doing so is to collect just let the iron plate and magnet separate, small precision parts will automatically fall one by one and not quickly collect.
Tip 3:
In order to prevent the pulley and axle in the transmission from slipping, a ¢15 ~ 18mm scratch nest drill can be used to scratch out multiple nests on the axle, thereby creating an adsorption force.
Tip 4:
To prevent deformation of the workpiece after initial clamping, it is necessary to first locate the six initial positioning points. This limits the degree of freedom and prevents deformation.
In the processing of non-standard precision mechanical parts, these inconspicuous tips can not only improve work efficiency, but also save a lot of resources, which is very attractive for large-scale mass production and processing of large-scale machinery factories. Similarly, these convenient and fast tips should be worth more and more people find the use of.
